0800 | 0900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 50 | 60 | 60 | 1 | 1 | 1 | 12 | 55 | 6.95 |
Beam Available but Not in Use | 10 | 0 | 0 | 0 | 0 | 0 | 28 | 0 | 0.633333333333333 |
Beam Not Available or Unacceptable | 0 | 0 | 0 | 0 | 0 | 0 | 20 | 5 | 0.416666666666667 |
Accelerator Con- figuration Chage | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Experiment Ready | 50 | 1 | 1 | 1 | 1 | 1 | 40 | 60 | 7.5 |
Planned Config- uration Change | 0 | 0 | 0 | 0 | 0 | 0 | 20 | 0 | 0.333333333333333 |
Unplanned Experiment Down | 10 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0.166666666666667 |
Hall not ready reasons | |||||||||
Target | 10 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0.166666666666667 |
HRSe | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSh | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Data Acq | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Other | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Comments: 8:00 Continuing Kin #14 which had just started (120microA) 10:55 Lower current to 60microA as DT test (Run 2286) 11:37 Run beam back up to 120 (Run 2287) 14:07 Beam off to check quantum efficiency. PD et al will try to raise current after this check 14:20 Change hadron spectrometer angle to 69.8deg (kin #13) to try to make use of possible extra beam. 14:55 Hadron angle set properly
Data Entry by: C. Glashausser