1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 | 2300 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Beam Available but Not in Use | 1 | 30 | 0 | 0 | 0 | 0 | 0 | 30 | 2 |
Beam Not Available or Unacceptable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Accelerator Con- figuration Chage | 0 | 30 | 1 | 1 | 1 | 1 | 1 | 30 | 6 |
Experiment Ready | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Planned Config- uration Change | 1 | 1 | 1 | 1 | 1 | 1 | 30 | 0 | 6.5 |
Unplanned Experiment Down | 0 | 0 | 0 | 0 | 0 | 0 | 30 | 1 | 1.5 |
Hall not ready reasons | |||||||||
Target | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSe | 1 | 1 | 1 | 1 | 1 | 1 | 30 | 0 | 6.5 |
HRSh | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 8 |
Data Acq | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Other | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Comments: 16:20: asked for sweep
17:30: start of beam tuning
21:55: access to reset the magnets and adjust an HRSH s1 paddle
22:30: problems resetting HRSH Q1
Data Entry by: M. Kuss