0000 | 0100 | 0200 | 0300 | 0400 | 0500 | 0600 | 0700 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 1 | 1 | 40 | 1 | 1 | 0 | 0 | 0 | 4.66666666666667 |
Beam Available but Not in Use | 0 | 0 | 20 | 0 | 0 | 1 | 1 | 1 | 3.33333333333333 |
Beam Not Available or Unacceptable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Accelerator Con- figuration Chage | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Experiment Ready | 1 | 1 | 40 | 1 | 1 | 0 | 0 | 0 | 4.66666666666667 |
Planned Config- uration Change | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 1 |
Unplanned Experiment Down | 0 | 0 | 20 | 0 | 0 | 0 | 1 | 1 | 2.33333333333333 |
Hall not ready reasons | |||||||||
Target | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSe | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 2 |
HRSh | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Data Ac | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Other | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Comments: 12-3 Finish optics studies Between 2-3 there was a slight problem with the DAQ. I was trying to run ESPACE on the data file at the same time it was being taken and we were getting the error that the ER was backed-up. This went away when ESPACE was killed and coda was restarted. 3-4 Open JT valve in preparation for target tests. Start electronics deadtime studies. lost time near end of shift (left spectrometer) due to angle change not working properly.
Data Entry by: K. McCormick