Main INDEX
Monthly INDEX
PREV
NEXT
User name R. Michaels
Log entry time 03:31:34 on October 2,2000
Entry number 49011
keyword=beam back, scan continues
MCC says that the beam is centered on the diffuser.
The 4B X,Y position is 1.55, -1.51 mm
3.8 kHz at 5.8 microamp.
Run.......current.......rate.......CH3........loop2
1292........20.6.........13.4.......187........5.3
1293........49.5.........30.4........187.......5.2
1294........60.4.........42.4.........189.......5.2.... note X position changes !
1295........70.3.........49.0.........192.......5.4
1296........78.5.........54.8.........195.......5.5
1297.......81.5...........49............194......5.5
We cannot go above 82 microamps because of beam trips.
We also note that the beam position (X) is a whopping 5.5 mm.
It apparently was steering (without our knowing) during
the above scan.
Try to leave this at 80 microamps for awhile.....