1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 | 2300 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 0 | 44 | 60 | 55 | 50 | 57 | 60 | 60 | 6.43333333333333 |
Beam Available but Not in Use | 0 | 10 | 0 | 5 | 10 | 3 | 0 | 0 | 0.466666666666667 |
Beam Not Available or Unacceptable | 60 | 6 | 0 | 0 | 0 | 0 | 0 | 0 | 1.1 |
Accelerator Con- figuration Chage | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Experiment Ready | 60 | 50 | 60 | 55 | 50 | 57 | 60 | 60 | 7.53333333333333 |
Planned Config- uration Change | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Unplanned Experiment Down | 0 | 10 | 0 | 5 | 10 | 3 | 0 | 0 | 0.466666666666667 |
Hall not ready reasons | |||||||||
Target | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSe | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSh | 0 | 0 | 0 | 0 | 10 | 0 | 0 | 0 | 0.166666666666667 |
Data Ac | 0 | 0 | 0 | 5 | 0 | 3 | 0 | 0 | 0.133333333333333 |
Other | 0 | 10 | 0 | 0 | 0 | 0 | 0 | 0 | 0.166666666666667 |
Comments: 16:00-17:00: Beam spot checks at accelerator's request. Spent this hour (and the previous 1/2 hour) trying to optimize our beam spot and decided to settle for original 90u x 100u. 17:06: Resume data taking for kinematics PY-2E. About 10 minutes lost due to X-raster size change (apparently HANA and SPOT++ use different calibrations which confused us) - at the end, raster was restored to original values. 19:14: CODA problem - 5 min. lost 20:45 Q3 on Right tripped, reset ok, cycling to 1400A before going back to set point. 20:55: Resume running 21:35: CODA problem -- 3 minutes lost. Smooth data taking for remainder of shift.
Data Entry by: Ulmer