0000 | 0100 | 0200 | 0300 | 0400 | 0500 | 0600 | 0700 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 1 | 1 | 1 | 45 | 1 | 1 | 30 | 1 | 7.25 |
Beam Available but Not in Use | 0 | 0 | 0 | 0 | 0 | 0 | 30 | 0 | 0.5 |
Beam Not Available or Unacceptable | 0 | 0 | 0 | 15 | 0 | 0 | 0 | 0 | 0.25 |
Accelerator Con- figuration Chage | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Experiment Ready | 1 | 1 | 1 | 1 | 1 | 1 | 30 | 1 | 7.5 |
Planned Config- uration Change | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Unplanned Experiment Down | 0 | 0 | 0 | 0 | 0 | 0 | 30 | 0 | 0.5 |
Hall not ready reasons | |||||||||
Target | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSe | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSh | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Data Ac | 0 | 0 | 0 | 0 | 0 | 0 | 30 | 0 | 0.5 |
Other | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Comments: Production at CQO-2A kinematics. A bit rocky. Crashes of roc14, roc1 etc (CODA), and also IOCs on beamline, and Moller quads. HV turned itself off on R-arm. The current on L-arm Q2 is fluctuating by +/- 0.3%. After roc14 crashed 5 times, we took access and swapped the cpu. My impression is that high radiation is frying roc14 and the network switch near the beamline
Data Entry by: R. Michaels